Sort by:
Corona takes its name from the thin ridge that runs along its edge like a small crown: a slightly raised line that circles the entire circumference, catching the light and, in the embellished versions, housing diamonds set flush with the surface.
This version is crafted in 18-karat yellow gold. It is embellished with a natural diamond set flush with the surface, with a carat weight of 0.02 ct. It is part of Brillanti Promesse, the UNOAERRE wedding ring collection with diamonds, designed not only for weddings but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse wedding rings, it features the UNOAERRE signature inside the band and is a registered design.
Like every UNOAERRE wedding ring, it is created from a single casting, with no soldering: a seamless process that eliminates structural weak points and ensures compactness and strength, mirroring the sense of continuity that the ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly superior to average gold jewelry.
As this is a wedding ring with diamonds, the size cannot be altered: it must be ordered in the exact size. The diamonds used by UNOAERRE come from legitimate sources, not involved in funding conflicts and in compliance with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city's leading goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 40 AFC 278/001 col.01.
Corona Slim features the raised rib that characterises the model on a slimmer band: a sharp line along the entire edge of the ring that defines the profile and houses the diamonds in the versions with stones.
This version is made of 18-carat rhodium-plated white gold. It is part of Brillanti Promesse, the UNOAERRE diamond wedding ring collection designed not only for weddings, but for any anniversary that marks an important moment in a love story.
Like all Brillanti Promesse rings, it is signed UNOAERRE on the inside and is a registered model.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a seamless process that eliminates structural weak points and guarantees compactness and strength, reflecting the very image of continuity that the ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly superior to average gold jewellery.
If necessary, the size can be increased by a maximum of 2 sizes and reduced by a maximum of 1, exclusively by cold working and after removing the seal; however, UNOAERRE recommends ordering the exact size to avoid altering its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city’s first goldsmith company, founded on 15 March 1926 and recognisable by the 1AR hallmark stamped inside every ring. Item code: 30 AFC 278 col.04.
Corona Slim features the signature raised rib on a slimmer band: a clean line along the entire edge of the ring that defines its profile and houses the diamonds set into the versions with stones.
This version is crafted in 18-karat rhodium-plated white gold. It is embellished with eight natural diamonds flush-set into the surface, for a total carat weight of 0.08 ct. It is part of Brillanti Promesse, the UNOAERRE wedding ring collection with diamonds, designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse rings, it is signed UNOAERRE on the inside and is a registered model.
Like every UNOAERRE ring, it is created from a single casting, without soldering: a seamless process that eliminates structural weak points and ensures compactness and strength, reflecting the very image of continuity that a wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly superior to average gold jewelry.
As this is a diamond wedding ring, the size cannot be altered: it must be ordered in the exact size. The diamonds used by UNOAERRE come from legitimate sources that are not involved in funding conflict and are in compliance with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city’s leading goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFC 278/008 col.04.
Corona Slim features the signature raised rib on a thinner band: a clean line along the edge of the ring that defines its profile and houses the flush-set diamonds in the versions with stones.
This version is crafted in 18-karat rhodium-plated white gold. It is embellished with a natural diamond flush-set into the surface, with a carat weight of 0.01 ct. It is part of Brillanti Promesse, the UNOAERRE wedding ring collection with diamonds designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse rings, it is signed UNOAERRE on the inside of the band, and it is a registered design.
Like every UNOAERRE wedding ring, it is created from a single casting, without welding: a seamless process that eliminates structural weak points and ensures compactness and strength, reflecting the very image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly superior to the average piece of gold jewelry.
As this is a wedding ring with diamonds, the size cannot be altered: it must be ordered to the exact size. The diamonds used by UNOAERRE are sourced from legitimate, conflict-free origins in compliance with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city’s first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFC 278/001 col.04.
Corona Slim features a thinner band while maintaining the raised rib that characterizes the model: a clean line along the entire edge of the ring, which defines the profile and houses the set diamonds in the versions with stones.
This version is crafted in 18-karat yellow gold. It is part of Brillanti Promesse, the UNOAERRE diamond wedding ring collection designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse rings, it is signed UNOAERRE on the inside of the ring and is a registered model.
Like every UNOAERRE ring, it is born from a single casting, without welding: a seamless process that eliminates structural weak points and guarantees compactness and resistance, reflecting the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly superior to average gold jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and reduced by a maximum of 1, exclusively by cold working and after removing the seal; however, UNOAERRE recommends ordering the exact size to avoid altering its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city’s first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFC 278 col.01.
Corona Slim features a thinner band with the raised rib that characterizes the model: a clean line along the entire edge of the ring, which defines the profile and houses the diamonds set in the versions with stones.
This version is crafted in 18-karat yellow gold. It is embellished with eight natural diamonds set flush with the surface, for a total carat weight of 0.08 ct. It is part of Brillanti Promesse, the UNOAERRE wedding ring collection with diamonds designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse rings, it is signed UNOAERRE on the inside, and is a registered model.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a seamless process that eliminates weak points in the structure and guarantees compactness and resistance, in the same image of continuity that the ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly higher than the average for gold jewelry.
As this is a ring with diamonds, the size cannot be altered: it must be ordered precisely. The diamonds used by UNOAERRE come from legitimate sources, are not involved in funding conflicts, and comply with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city’s first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFC 278/008 col.01.
Corona Slim features the embossed edge that characterizes the model on a thinner band: a clean line along the entire edge of the ring, which defines the profile and houses the diamonds set into the versions with stones.
This version is crafted in 18-karat yellow gold. It is embellished with a natural diamond set flush with the surface, with a carat weight of 0.01 ct. It is part of Brillanti Promesse, the UNOAERRE wedding ring collection with diamonds designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse wedding rings, it features the UNOAERRE signature inside the ring and is a registered model.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a seamless process that eliminates weak points in the structure and ensures compactness and resistance, reflecting the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a mix developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than average gold jewelry.
As this is a wedding ring with diamonds, the size cannot be altered: it must be ordered in the exact size. The diamonds used by UNOAERRE come from legitimate sources, are not involved in conflict financing, and are in compliance with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city’s first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFC 278/001 col.01.
Eclissi stages the meeting of two golds. On the comfortable band, yellow gold and white gold overlap along a soft line, like one disc partially covering another: hence the name. It is the two-tone model in the Cerchi di Luce family.
This version is crafted in 18-karat yellow and white gold. The band is 4 mm wide, constant across all ring sizes, for both him and her. The weight varies with the ring size, from 6.70 to 7.20 grams.
It is recognizable by the refined UNOAERRE yellow gold seal applied to the ring: it guarantees the jeweler and the couple that the wedding ring is the original size and produced in the Arezzo facility, and therefore that it retains its characteristics of hardness and resistance to wear intact.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a process free of joints that eliminates weak points in the structure and guarantees compactness and resistance, in the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average for gold jewelry.
The size can be enlarged by a maximum of 1 size and cannot be reduced: we recommend ordering the exact size.
Produced in Arezzo by UNOAERRE Industries, the city's leading goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 70 AFC 283 col.07.
Eclissi stages the encounter of two golds. On the comfortable band, yellow gold and white gold overlap along a soft line, like one disc partially covering another: hence the name. It is the two-tone model of the Cerchi di Luce family.
This version is crafted in 18-karat yellow and white gold. The band measures 4 mm in width, constant across all ring sizes, for both him and her. The weight varies with the ring size, from 6.70 to 7.20 grams. It is embellished with a natural diamond set flush with the surface, with a carat weight of 0.03 ct.
It is recognizable by the refined yellow gold UNOAERRE seal applied to the ring: it guarantees to the jeweler and the couple that the wedding ring is the original size and produced in the Arezzo facility, and therefore that it maintains its characteristics of hardness and wear resistance intact.
Like every UNOAERRE wedding ring, it is born from a single casting, without welding: a manufacturing process without joints that eliminates weak points in the structure and guarantees compactness and strength, in the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average gold jewelry.
As this is a wedding ring with diamonds, the size cannot be altered: it must be ordered exactly. The diamonds used by UNOAERRE come from legitimate sources, not involved in funding conflict and in compliance with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR trademark stamped inside every ring. Item code: 70 AFC 283/001 col.07.
The "Francesina" is the slenderest of the UNOAERRE Classic wedding rings. For the same weight, the band narrows and gains thickness: the result is a sober and discreet ring, which is unobtrusive and is worn naturally every day, even by those who are not used to wearing a ring.
This version is made of 18-karat rhodium-plated white gold. The weight is 1.50 grams.
It is recognizable by the refined UNOAERRE yellow gold seal applied to the ring: it guarantees to the jeweler and the bride and groom that the ring is the original size and produced in the Arezzo factory, and therefore that it retains its characteristics of hardness and wear resistance intact.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a process free of joints that eliminates weak points in the structure and guarantees compactness and strength, in the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average gold jewelry.
If necessary, the size can be enlarged by a maximum of 2 sizes and narrowed by a maximum of 1, exclusively cold and subject to the removal of the seal; however, UNOAERRE recommends ordering the exact size so as not to alter its characteristics.
Produced in Arezzo by UNOAERRE Industries, the first goldsmith company in the city, established on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 15 AFN 4 col.04.
The "Francesina" is the slenderest of the UNOAERRE Classic wedding rings. For the same weight, the band narrows and gains thickness: the result is a sober and discreet ring, which is unobtrusive and is worn naturally every day, even by those not used to wearing a ring.
This version is made of 18-karat rhodium-plated white gold. The weight is 3 grams.
It is recognizable by the refined yellow gold UNOAERRE hallmark applied to the ring: it guarantees to the jeweler and the couple that the ring is the original size and produced in the Arezzo factory, and therefore that it retains its characteristics of hardness and resistance to wear intact.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a process free of joints that eliminates weak points in the structure and guarantees compactness and strength, in the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average gold jewelry.
If necessary, the size can be enlarged by a maximum of 2 sizes and reduced by a maximum of 1, exclusively by cold working and after removing the hallmark; however, UNOAERRE recommends ordering the exact size so as not to alter its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFN 4 col.04.
The "Francesina" is the slimmest of the UNOAERRE Classic wedding rings. For the same weight, the band becomes narrower and gains thickness: the result is a sober and discreet ring, which is barely noticeable and worn naturally every day, even by those who are not used to wearing a ring.
This version is made of 18-karat rhodium-plated white gold. The weight is 4 grams.
It is recognizable by the refined UNOAERRE yellow gold seal applied to the ring: it guarantees the jeweler and the couple that the ring is the original size and produced in the Arezzo facility, and therefore that it retains its characteristics of hardness and wear resistance intact.
Like every UNOAERRE wedding ring, it is born from a single casting, without welding: a process free of joints that eliminates weak points in the structure and guarantees compactness and resistance, in the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average gold jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and decreased by a maximum of 1, exclusively cold-worked and upon removal of the seal; UNOAERRE, however, recommends ordering the exact size so as not to alter its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR trademark stamped inside each ring. Item code: 40 AFN 4 col.04.
The "Francesina" is the slimmest of the classic UNOAERRE wedding rings. For the same weight, the band becomes narrower and increases in thickness: the result is a simple and discreet ring, which is barely noticeable and worn naturally every day, even by those not used to wearing a ring.
This version is made of 18-karat yellow gold. The weight is 1.50 grams.
It is recognizable by the refined UNOAERRE yellow gold seal applied to the ring: it guarantees the jeweler and the couple that the ring is the original size and produced in the Arezzo factory, and therefore retains its characteristics of hardness and resistance to wear.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a seamless process that eliminates structural weak points and guarantees compactness and resistance, in the same image of continuity that the ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average gold jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and decreased by a maximum of 1, exclusively by cold working and after removing the seal; however, UNOAERRE recommends ordering the exact size to avoid altering its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 15 AFN 4 col.01.
The "Francesina" is the slimmest of the UNOAERRE Classic wedding rings. For the same weight, the band becomes narrower and gains in thickness: the result is a sober and discreet ring, which is subtle and feels natural to wear every day, even for those not used to wearing a ring.
This version is crafted in 18-karat yellow gold. The weight is 3 grams.
It is recognizable by the refined UNOAERRE yellow gold hallmark applied to the ring: it guarantees the jeweler and the couple that the ring is the original size and produced in the Arezzo facility, and therefore that it maintains its structural integrity, hardness, and wear resistance.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a seamless process that eliminates structural weak points and ensures compactness and strength, mirroring the very image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear resistance characteristics significantly higher than the average gold jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and decreased by a maximum of 1, strictly cold-worked and after removing the hallmark; however, UNOAERRE recommends ordering the exact size to avoid altering its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, established on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 30 AFN 4 col.01.
The "Francesina" is the slimmest of the UNOAERRE Classic wedding rings. For the same weight, the band becomes narrower and gains in thickness: the result is a sober and discreet ring, which is barely noticeable and worn naturally every day, even by those who are not used to wearing a ring.
This version is crafted in 18-karat yellow gold. The weight is 4 grams.
It is recognizable by the refined UNOAERRE yellow gold seal applied to the ring: it guarantees the jeweler and the couple that the ring is the original size and produced in the Arezzo factory, and therefore retains its characteristics of hardness and wear resistance intact.
Like every UNOAERRE wedding ring, it is created from a single casting, without soldering: a process free of joints that eliminates structural weak points and ensures compactness and resistance, in the same image of continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with characteristics of hardness and wear resistance significantly higher than the average gold jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and reduced by a maximum of 1, exclusively by cold-working and subject to the removal of the seal; UNOAERRE, however, recommends ordering the exact size so as not to alter its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 40 AFN 4 col.01.
The "Francesina" is the narrowest of the classic UNOAERRE wedding bands. For the same weight, the band becomes narrower and increases in thickness: the result is an understated and discreet ring, which is barely noticeable and easy to wear every day, even for those who are not used to wearing a ring.
This version is crafted in 18-karat rose gold. The weight is 4 grams.
It is recognizable by the refined yellow gold UNOAERRE seal applied to the ring: it guarantees to the jeweler and the couple that the ring is the original size and produced in the Arezzo facility, and therefore that it retains its characteristics of hardness and resistance to wear and tear.
Like every UNOAERRE wedding band, it is created from a single casting, without soldering: a seamless process that eliminates structural weak points and ensures compactness and strength, mirroring the very image of continuity that a wedding band represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding bands, with hardness and wear-resistance characteristics significantly superior to the average gold piece of jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and reduced by a maximum of 1, exclusively by cold-working and subject to the removal of the seal; however, UNOAERRE recommends ordering the exact size to avoid altering its characteristics.
Produced in Arezzo by UNOAERRE Industries, the first goldsmith company in the city, established on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 40 AFN 4 col.18.
Hydra features an essential geometry: the top surface is flat and the sides are beveled with a sharp cut, so that the band reflects light on distinct planes rather than on a continuous curve. A clean, almost architectural design.
This version is crafted in 18-carat rhodium-plated white gold. It is part of Brillanti Promesse, the UNOAERRE diamond wedding ring collection designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse rings, it is signed UNOAERRE inside the ring and is a registered model.
Like every UNOAERRE ring, it is created from a single casting without welding: a seamless process that eliminates structural weak points and ensures compactness and strength, mirroring the continuity that the wedding ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly higher than average gold jewelry.
If necessary, the size can be increased by a maximum of 2 sizes and decreased by a maximum of 1, exclusively by cold working and after removing the seal; however, UNOAERRE recommends ordering the exact size to avoid altering its characteristics.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 40 AFC 280 col.04.
Hydra features an essential geometry: the top surface is flat and the sides are beveled with a sharp cut, allowing the band to reflect light on distinct planes rather than a continuous curve. A clean, almost architectural design.
This version is crafted in 18-karat rhodium-plated white gold. It is embellished with a flush-set natural diamond, with a carat weight of 0.03 ct. It is part of Brillanti Promesse, the UNOAERRE diamond wedding ring collection designed not only for weddings, but for any occasion that marks an important moment in a love story.
Like all Brillanti Promesse wedding rings, it is signed UNOAERRE on the inside of the band and is a registered model.
Like every UNOAERRE wedding ring, it is created from a single casting with no soldering: a seamless process that eliminates structural weak points and guarantees compactness and durability, mirroring the very image of continuity that the ring represents. The gold is alloyed with other metals in a blend developed exclusively for the production of wedding rings, with hardness and wear-resistance characteristics significantly superior to the average gold jewelry.
As this is a diamond wedding ring, the size cannot be modified: it must be ordered in the exact size. The diamonds used by UNOAERRE come from legitimate sources, not involved in funding conflict and in compliance with United Nations resolutions: UNOAERRE is a member of the Responsible Jewellery Council.
Produced in Arezzo by UNOAERRE Industries, the city's first goldsmith company, founded on March 15, 1926, and recognizable by the 1AR hallmark stamped inside every ring. Item code: 40 AFC 280/001 col.04.